Cool Amp Find Vol. 2 – 2000’s Fender Custom Vibrolux Reverb

Here’s another cool amp find that we recommend: A 2000’s era Fender Custom Vibrolux Reverb. We found ours a local music store that has virtually all second hand gear. Something in the back of my head thought it might be “something” so we nabbed it. You can typically find them anywhere from $550 – $800.

But be warned: This is a somewhat controversial amplifier, and owning one might subject you to criticism and scorn on the gear forums.

CVR

Why? Because while it has blackface cosmetics, it’s not really a blackface amplifier. It’s more similar to the early 60’s brownface Vibrolux Reverb, but it’s not an exact copy of that either. Designer Bruce Zinky — who is the designer of the new line of Supro amplifiers — designed the “CVR” to be a spongier, more forgiving amplifier that would break up a lower volumes. Sort of a brown/tweed if you will. Along the way he also enabled reverb on both channels, took out the negative feedback, and a few other tweaks. Depending on your point of view, he’s either a hero or a heretic.

Maybe not quite a hero, but everyone who plays it really likes this amplifier. Try as I might, I could never really bond with a true blackface. I’ve tried a couple true Black and Silverface Pro Reverbs, but tended to find them too stiff, too bright, and too loud. Getting any character out of them required uncomfortable volume levels. I’ve been more of a tweed fan, and even my Dr. Z Remedy is similar to a smaller Marshall, which was copied from the Bassman, which is a tweed. But while little tweeds are fun, they don’t much headroom at all, which is limiting if you are in a cover band and want to use some pedals.

The CVR fits this middle ground and has enough headroom to gig, but gets its character at reasonable levels. Turn the volume up to about 5 and play with the guitar’s volume knob and you can get a wide range of excellent clean to lightly crunchy tones. It’s a little loose in the low end, but that’s the plan.

But purists decry it’s lack of faithfulness to any particular original Fender schematic, the low background hiss caused by adding reverb to both channels, and what’s felt to be an overall wimpy reverb. Phooey I say. In most situations it’s way more usable, and gives you the “turned up” tone at a level your band can live with. And does anybody turn a “true” Fender reverb up over 3? Regarding the hiss, who can tell once you are playing? And if you have a drummer it’s a totally moot point.

In addition the 2×10 speaker format is a great combination. There is more speaker surface area than a 15″ speaker, and you get nice low end response and better coverage with less beaming than a single 12″ speaker. Top it all off, the CVR weighs only around 40 pounds, maybe less depending on speaker choice.

Naturally, since this is not a faithful reproduction of a Vibrolux there are modification kits to make it true to the brownface Vibrolux schematic. Moyer is one of those kits and Fromel makes a couple different versions of his kit. My brother installed the Fromel kit in his CVR and it did exactly as intended. My only caution is that is “undoes” some of what makes it a CVR, and makes it more like a true Vibrolux. Yes, it is quieter, but also little stiffer and brighter. Fortunately you can do only parts of the Fromel kit, and the instructions tell you exactly what mod is having which impact on the amp. You can upgrade the tone caps and power supply caps, but not necessarily put back the negative feedback, etc.

These are really nice amps, easy to carry, and for very reasonable money your are getting a gig-worthy amp that will rival products costing triple the price. Hands down my favorite all-around Fender so far. With the new amplifier world generally split into two camps of cheap/depressing and boutique/expensive the CVR is a gem.