Spalted wood tops for both Looks and Tone

While electric guitars and basses are first and foremost musical tools, for many players looks run a close second to tone. For years guitar builders have used various types of wood tops to enhance the looks — and sometimes tone — of solid and semi-hollow electric guitars. Flamed and quilted maple tops have been a perennial option from many manufacturers including G&L, Gibson, PRS, Fender, Godin and others. But one of the more interesting materials of late has been spalted woods. These materials are not part of the regular G&L price book, but they show up depending on availability.

sb2-tight
Spalted alder top on a G&L SB-2

Spalting is caused by fungus that attacks both live and dead trees causing unique coloration and figuring of the wood. It can lead to weight and strength loss, and also reduced density. So while you would not want to build a whole guitar out of a spalted wood, when stained and finished they are unique and eye-catching. Some guitar builders will also use dyes injected into the wood grain to accentuate the look even further.

Tone impact? – Maple tops have been used for years, and in many cases not only look good but have a beneficial impact on tone. This is especially true on set-neck, shorter scale guitars like a Gibson Les Paul, which tend to have a darker tone, and less pronounced attack and harmonics. The dense maple top brightens up the tone and is more reflective. It’s a good complement to warmer more mid-focused sound of mahogany, humbuckers, etc.

But maple as a top is not a particularly complex or rich sounding material. While this works well to “liven up” a Les Paul, the effect is different on a bolt-on, longer scale guitar with single coil pickups. Maple combined with the snappy, more focused tones of a single coil can sound a little dry and one-dimensional. We’ve had maple tops on various G&L’s, and our impression is that they have very clear emphasis on the fundamental note, but not a lot of complexity. We are not totally down on maple, but it benefits from fuller sounding pickups and more complex sounding woods for the back materials: Think humbuckers, most MFD’s (maybe not the Z-coil) and swamp ash.

The spalted woods tend to be different, and our own hypothesis is that the effect of the spalting makes them less dense and softer, even when the material is maple. We’ve found spalted top guitars to be every bit as complex and musical as a good swamp ash bodied guitar. The top may lend even more warmth and richness, but with no two guitars ever being exactly alike, we don’t want to go overboard on analysis. Suffice to say on something like a G&L or other single coil guitar, we very much like the sound of a spalted top, and feel it complements the tone.

Other Materials? – While not a spalted wood, we find Black Limba works nice on G&L-style guitars too. Limba is mahogany-like in tone — though actually not part of the mahogany species — and a Limba cap adds some warmth and mid-range emphasis to a single coil, bolt-on guitar. And it looks pretty. Something we would not do? Maple and Empress: That’s bright/focused on top of bright/focused. It might work on a bass (we like Empress for a bass) but would be as dry and crisp as James Bond’s Martini.

G&L Kiloton Black Limba top
G&L Kiloton Black Limba top

Choosing the cosmetics of your guitar is a fun part of the buying process. But choosing just on looks can have unintended consequences. Keeping in mind what works well together, it’s completely possible to combine both good looks and good tone.

 

G&L: What’s new for 2018?

Doheny SH 2017 was a very active year for G&L and they’ve gained steam, rolling into 2018 with a lot of new products, features and a whole new look on their website. Let’s take a quick look at what’s new for 2018:

New Website – G&L has launched their new website, and it’s cleaner, more modern and better pictures and images. G&L is also clearly promoting their heritage, and the Leo Fender story in a more obvious fashion. Makes a lot of sense when your founder invented the modern solid body electric guitar and bass. They also have a new “CLF Research” Instagram and Facebook page.

It’s still a work in progress, and there are some guitars and options in my price book that are not on the site, and vice versa. So we are working through that, and if you have any questions, just check with us and we’ll get an answer.

NAMM – G&L had a booth at NAMM for the first time in many years. It was packed, very active, and they had some great one-off guitars on the wall (we snagged a couple). Phyllis Fender was on hand to sign copies of her new book about Leo Fender the man. It’s the story of Leo, not a history of Fender guitar. It’s a pretty quick read and quite insightful about a very unique and creative individual that did not even play guitar.

G&L Custom Shop – G&L has launched their Custom Shop concept, and there is a dedicated section on the website for custom shop guitars. There a new finishes — the nitro option is back — the availability of hand-wound and signed pickups off Leo’s original CLF pickup winder, mild aging if you want it, and in general a much higher level of attention and hands-on TLC. Considering how good the “factory” guitars currently are, this is a pretty high bar. It’s not clear how “custom” you can get, and this is a work in progress. I don’t have a enough detail to know if you can put P-90’s in a Doheny, make a single pickup Fallout with Solamente wiring, etc. It’s baby steps as they feel out the process, and if you are interested give us a shout and we’ll work through the process with you.

What’s Out – The SC-2 is gone for 2018. My feeling is that once the Fallout came along, that really took the air out the SC-2. It’s fun guitar but they still have the ASAT special and it’s the same pickups.

What’s New  – The Doheny was new for the fall of 2017 and they’ve now rolled out the Doheny Deluxe and Doheny Semi-Hollow. The Deluxe is a Flame Top guitar with wood binding and rear-mounted controls. But you don’t have to get binding, and what we also like about the Doheny is that Fixed or Vibrato bridge is the same price. Also the MAP for this guitar is $200 less than then similarly outfitted ASAT Deluxe.

The Doheny Semi-Hollow comes standard in swamp ash and also includes wood binding and rear mounted controls. Our feeling here it to opt for an Okoume back when ordering this guitar. Semi-hollow guitars tend to gain some nice harmonics, but lose a bit of low end. The Okoume back will add in a bit of roundness and warmth.

Also note there are no neck profile options on the Doheny. It’s a Modern Classic, but you can opt for a different radius. The Doheny has its own 21-fret neck, and it’s not tooled to handle all the other profiles. The “MCNK” seems to be very popular, so I think they are sticking with what most people want anyway.

Also new is the CLF Heritage L-2000. This is a throwback L-2000 with an 80’s neck profile, the cool 80’s metal control plate, glossy neck finish, and “Heritage” MFD pickups. It’s available in four colors and no options. To keep the weight down they are using Basswood on the solid colors and Okoume on the bursts. Both woods work very nice on a bass, with punchy and clear fundamental notes.

Not Sure – The Invader and Invader XL are still in my 2018 price book but not on the new website. I don’t think they are dead, but that there is a make-over in the process in terms of a more shred-friendly neck profile and other features. The Anderson/Suhr market is something G&L has yet to crack, and they’ve got their eye on it. The ASAT Fullerton Standard is on the website but also not in the price book, and I know that’s currently not in the plans.

While I’ve not scoured the prices in excruciating detail, nothing pops out, and all the base guitar MAP prices appear unchanged. Rosewood is now a $50 MAP option and “Caribbean Rosewood” (Chechen) is now the standard “brown” wood. We really like Chechen, and while it’s not as dark as Rosewood, it’s got really interesting grain and it feels nice and smooth. Due to CITES regulations Rosewood has become problematic, and the supply is erratic.

Neck Profiles – The 2018 book is not listing the V-profiles, U, the Wide C, or Heritage profile. But the website is. We’ll have to sort this out, and it could be that the wide range of profiles will be reserved for Custom Shop. I will lobby for the Soft-V though….

New Colors – Rally Red (sort of Fiesta), Galaxy Black (jet black with a subtle light metallic flake), Shell Pink, and Surf Green joins the permanent ranks. Yukon Gold Metallic is out, and they are working on a better replacement. Nobody really liked Yukon Gold, including G&L.

Overall we like what G&L has been up to, and while sometimes they run before they walk, it’s all with good intentions. They also maintain a presence on Social Media, which a lot of companies just don’t bother to do. That’s good for the brand image, brand value, and ultimately resale value. We think 2018 will be a great year for G&L, and let us know if you have any questions or comments at studio@upfrontguitars.com

 

G&L – What is new for 2017?

Back from our 2017 NAMM trip and G&L factory tour, we’d thought we’d let you in on what’s new in 2017 for G&L. Before we get rolling, there are no base price changes to the guitars or the major options. There may be a couple tweaks here and there, but nothing that has a significant effect on the price of a guitar.

Note: G&L’s website may not be entirely up to date. If you have any questions, please feel free to contact us. Here’s a rundown of the more notable changes:

Basswood – Basswood is now an option on any guitar for a slight up charge. Basswood is sonically similar to Alder but lighter in weight. This is is response to the growing interest in lighter weight guitars (It’s all those Baby Boomers with back issues!) The grain on Basswood ain’t much, so if you opt for premium finish, it may be a little underwhelming.

Okoume – Also a new wood option with pricing similar to Swamp Ash. Okoume is similar tonally to Mahogany, but lighter in weight and not regulated or endangered in any sense. It has a reddish tint, so keep that in mind when going for premium finishes (Hint: Old School Tobacco or Clear Red). Okoume was used on the Savannah series of semi-hollow guitars, which we thought sounded great.

Empress Wood – Still available, but not a consistent enough supply to make it into the price book. I really like the clean forward tone of an Empress bass, but maybe a little bright on some guitar models. The shop foreman at G&L prefers the tone of a multi-piece Empress body used for solid finishes rather than the one or two-piece clear finish variety.

Carmelized Ebony – Think of this as “striped ebony” and G&L has a limited number of boards that are in guitar length only. There was a time when only purely black ebony would do. But dwindling resources and the impact of Bob Taylor (Taylor Guitars) and his quest to preserve Ebony has made streaked Ebony acceptable. More power to him. Frankly it looks great, and I love the feel of a real ebony fretboard. It’s a great surface and not a huge up charge.

Rosewood – Rosewood is now becoming a highly regulated wood. This is a result of the increased demand in China for Rosewood furniture, and when 1.2 billion people want something…well that has an impact. There are literally a couple hundred varieties of Rosewood including Cocobolo. Expect to see more manufacturers looking for alternate fretboard woods that have good tonal properties and the right feel.

No Semi-Hollow Legacy, Comanche, S-500….for now – G&L is in the midst of re-tooling a number of guitars, and the low demand of these models has taken them off the list for now. IMHO – If you think a Legacy with less low end is a good idea, have at it. But I’ll stick with a solid body. If weight is a overriding concern, Basswood, Okoume, or Empress is a better route and a lot less money.

Rear Mounted Control Guitars (RMC) – Many of the “Deluxe” guitars have given way to a no-pickguard style guitar without the requirement to purchase a flame maple top. This is a big deal, and makes an ASAT Deluxe pickup configuration much more affordable. You can still get an ASAT Deluxe, but now it’s not the only way to get two humbuckers in an ASAT.

Block Inlays – Rumored to be in the works but not in the latest price book. If you like the look of the big block inlays introduced by Fender in the mid-60’s they are on the way.

A few years back I came up with the tagline for my website, “Guitars made by craftsman, not accountants.” That really sums up G&L: A bunch or really dedicated people who love guitars. Like a lot of small manufacturers in the music business, it’s a labor of love, and when you talk to the folks as G&L you definitely get that vibe.

 

Little known G&L product options – Logo Delete

asat-qmt-hsOne no-cost option that we’ve grown rather fond of is the “Logo Delete” option for G&L headstocks. Just as it implies, the Logo Delete option gives you just the G&L logo without any model designation. We think it gives the guitar a nice clean appearance, and if you are doing a model that has no specific logo — such as a Bluesboy — you might even say it makes sense. Some players have never seen this option before, and one prospective buyer asked if it was a replacement neck.

Because they don’t have decals for every possible color combination, matching painted headstocks almost always come with a logo delete.

leg-hb-lemon-hs
G&L Legacy, gloss finish with standard logo

We like the look, and have ordered several guitars in this style.

New body wood options for your G&L Guitar

For years, the standard body wood offerings from G&L have been Alder and Swamp Ash. Mahogany is available too, but is generally reserved for the ASAT Deluxe and other maple topped guitars.

For a couple years G&L has been quietly offering pine as a non-price list option, and lately Empress Wood. Here is quick rundown on the two “other” woods currently in the G&L line up.

Pine – We’re personal fans of pine, most notably for its tone, and generally good weight properties. Pine has a slightly softer top end, and a touch of compression on the attack. So while as not punchy as some woods, it’s got a little “give” and responds nicely to pick attack. The low end is also very clean and clear. It’s good for basses as well as guitars. The heaviest pine guitar we’ve seen is 7.8 pounds, but they are more typically 6.8 – 7.4, with bass guitars being proportionally heavier. The grain pattern is nothing dramatic, and tends to be straight and clear.

Empress – Looks a lot like swamp ash, and is the welterweight champion of the current G&L lineup. This fast-growing and strong wood is native to Asia, and has historically been used for both musical instruments, and furniture. Empress guitars are typically right around 7 pounds, and our experience is that there is not a great degree of weight variation between guitars. Tonally Empress is on the brighter side with a very solid and punchy attack. The sound is a little less dimensional than swamp ash, with greater emphasis on the fundamental tone. If you like a forward tone with plenty of presence, Empress is a good choice. We really like it for bass guitars, and it has very solid low end response.

So two woods, with two very different personalities. With many guitar players — especially those of a certain age — looking for lightweight and comfortable guitars, both Empress and Pine offer alternatives to traditional woods, and with their own unique tonal spin.

David Allen Strat Pickups – Impressions

strat setDavid Allen makes a lot of different Strat® pickups, maybe almost too many to figure out what to select. The variability of available sound-clips and videos only adds to the complexity. So when we decided to carry the line we asked David himself what pickups were most representative of the range. He recommended three sets: TruVintage 54, Tru ’62, and the Voodoo Blues SSS set. So armed with our trusty G&L Legacy (swamp ash, hardtail, Emerson wiring assembly, maple fretboard) we set about trying out all three sets to see how they compared.

Dave Allen TruVintage 54

As with many of the David Allen pickups, they don’t attempt to completely follow every excruciating construction detail of the original pickup. Instead they focus on creating the sound of a ’54 Strat rather than just replicating the construction. The TruVintage 54’s are wound progressively in the mid-to-upper 5K range and use staggered, beveled Alnico 3 magnets. Having never handled a true 1954 Stratocaster® (tonally these pickups are modeled after an actual set of ’54 pickups) we can only say that they sound the way we “think” they should sound: Exceptionally clean, glassy, with a bouncy low end. Characteristically, the bridge pickup is pretty light, and to some may only serve to pair with the middle pickup. But the Alnico 3 magnets lend enough sweetness to the high end that it’s not shrill or brittle. So you can actually use a distortion pedal with the bridge pickup and get some decent rock sounds. The TruVintage 54’s are textbook Strat, and hit the mark for those putting together the ultimate vintage Strat.

David Allen Tru ’62

Like the 54’s, the Tru ’62 set is graduated set, but wound from the low to mid 6K range from neck to bridge. They also use staggered magnets but in this case Alnico 5. They are rounder and warmer than the 54’s and a little less glassy. But they project a more soulful nature, and have a deeper rounder bass. There is also a little less quack to the positions 2 and 4, but in return you get one great sounding middle pickup. It’s got good low end like the neck pickup, but more twang and bite. It’s my favorite position of this set, followed by the neck + middle. Overall, the Tru 62’s are a slightly huskier sound than the 54’s but certainly won’t be mistaken for anything else than a Strat.

David Allen Voodoo Blues SSS

The Voodoo Blues set is a light top/heavy bottom set with a twist. The neck and middle pickups are wound to about 5.8K with staggered and beveled Alnico 5 magnets. These are right out of the David Allen ’69 Voodoo set, and you  get one guess as to what tone they were aiming for. They are bright and glassy with a percussive and snappy low end. Just the ticket for some Jimi, SRV or Los Lonely Boys. The bridge is wound to 7.8K but instead of just more wire, it’s also a lighter gauge wire. The net result is more output without the loss of clarity and detail typical of a higher output pickup (technically a higher resistance without a big jump in inductance). So you get more punch and better pedal performance without a big tonal sacrifice. Players who want to rock their Strat but won’t compromise on looks or authentic tones will like the Voodoo Blues SSS set.

 The Wrap

These pickups are not radically different from each other. It’s not like we were testing Hot Rails versus a vintage reproduction pickup. But in each case as we changed sets there was an “oh yeah, I can hear that” feeling as soon as we plugged in. We were not in total agreement on what we liked best either. My favorite set was the Tru 62’s while our new Sales Tech Eric liked the sweet-but-glassy tones of 54’s followed by the Voodoo SSS. For the moment, the Tru 62’s are staying in our Legacy, but the discussion is not over yet….

 

What fretboard material for your G&L guitar?

With many electric guitars, the choice of fretboard material is often not an option. The manufacturer can have many reasons for choosing a particular material — cost, looks, feel — short of a custom shop model, most guitars are built with a certain fretboard material and that’s the end of it.

Any G&L guitar is available with a choice of three materials, with rosewood and maple being no-cost options, and ebony as an up-charge. In addition, there is the added option of selecting a gloss or satin finish on the maple fretboard (all fretboard materials are available with satin or gloss finish maple necks). Many players feel quite strongly about fretboard material, but in my own experience the fretboard material typically plays a small part in how much I like or love a guitar (I never hate a guitar, but I might find myself uninspired). Quite often I choose the fretboard material (and finish or tint) based on how I want the cosmetics of the guitar to come out, and the price point I am trying to hit. A satin finish neck is the least expensive and a gloss neck with ebony fretboard is the most expensive. Keeping that in mind, here is quick rundown of the options:

Maple

The original Fender guitars were solid maple necks, and this was purely a matter of cost. Maple is hard, stable and cheap. Traditional classical instruments used rosewood and ebony, but Leo Fender was first and foremost a keen businessman and manufacturer. Around 1959, Fender started offering rosewood to give his guitars a more high-end look.

A satin or gloss finish maple neck is felt to have a tighter and brighter tone than rosewood, and depending on the finish tends to feel quicker too. A satin neck has a nice dry feel that does not get sticky or sweaty, whereas gloss maple does give the guitar a more finished look. I often opt for a tinted satin neck as a good combination of looks and feel. That being said, my favorite personal ASAT guitars have had glossy maple necks. If I like a guitar, it’s a package deal.

HINT: If you are stickler for nicely polished frets, a glossy maple fretboard always had the nicest fret finish. Why? The gloss finish is sprayed on after the frets are put in, then then the finish is polished off. This extra amount of finish work results in extra-smooth shiny frets. It’s also why glossy necks cost more. Time is money.

Rosewood

Rosewood is likely the most common material for fretboards. It’s a traditional material that’s attractive, reasonably dense and easy to work. Depending on cost, rosewood can vary from a very light brown to a dark, almost greasy feeling brown-black. My personal preference both for looks and texture is the darker streaky rosewood, and G&L typically sources pretty nice looking stock. Less expensive guitars will often have the lighter, plainer looking rosewood. Rosewood has a little more “grip” than maple, and is a touch warmer and less percussive. I like rosewood with Legacy guitars, as it does have a tendency to round out the tone. Good rosewood is not as plentiful as it once was, and exports and harvesting are tightly controlled.

Ebony

While I’ve somewhat downplayed the difference between maple and rosewood, ebony does offer a noticeably different experience. Ebony is very dense, with a hard silky feel that sets itself apart from from even a glossy maple finish. Ebony produces the most percussive tone — is great for tapping and pulls — and works well with humbuckers or darker sounding woods. I specify ebony most often with ASAT Deluxe, Legacy HSS and Legacy HH guitars, as ebony tends to fit the tone, look, and ethos of these models. I had a customer order an ASAT Classic S Alnico with ebony and I really liked it. It made the neck pickup more snappy without making the guitar brighter overall. Ebony would not have been my first pick, but the net result was very pleasing.

While pricy, an ebony fretboard on satin maple with stainless frets practically plays itself. We’ve had a couple guitars built this way, and the glassy feel made a direct impact on how we approached playing those guitars.

Ebony is quite rare and the main source is Cameroon. Jet black ebony is most prized, but constitutes only a small proportion of harvest-able wood. Out of necessity “streaky” ebony is becoming more common, and it’s attractive in its own right. Taylor guitars co-owns an ebony mill in Cameroon, and imports of non-regulation ebony is what got Gibson heavily fined a few years back. Taylor has a very good video about ebony on YouTube, and it will give you a real appreciation about why it is so important to sustainably harvest this wood.

The Wrap

Looks are important, and when it comes to maple or rosewood, go with what “speaks” to you in terms of visual appeal and playing feel. If you like glossy, get glossy and don’t fret (no pun intended) about any tonal side effects. If you desire the fastest smoothest playing surface, or are looking at a humbucker model, ebony is definitely worth consideration.

 

 

G&L 2015 Mid-Year Model Changes

As of July 1st 2015, G&L is making some of the more significant model specification changes in quite some time. G&L has gone through their whole lineup, and practically no guitar remains untouched in some way or another. Pricing is changing too, both in the form of some increases, and how guitars are priced relative to each other. There is a lot to take in, but here is a rundown on the more notable changes to the guitars, along with some commentary.

Neck Profiles

For years the #1 “C” profile neck with 12″ radius has been standard on most G&L guitars. On the Legacy and ASAT line this is now changing to the “Modern Classic” neck. The Modern Classic neck is 1-11/16 at the nut with less of a taper than the #1 neck (now .830 at the 1st fret to .870 at the 12th). On the ASAT and Legacy line the standard radius is 9.5″.

Also of note is that G&L has separated neck shape from radius. And in the dealer price list there are separate options for fingerboard radius (7.5, 9.5, 12) and for profiles. So pretty much you can mix and match anything for one up-charge. You don’t get dinged twice for radius and shape.

Why the new profile on their most popular guitars? One thought is that a frequent question I get is, “which profile is most like a Fender?” The Modern Classic is a pretty close fit. In addition there were occasional complaints about string fall-off with the #1 neck, and the slightly wider nut width of the Modern Classic will help this. Most of the other profiles remain (C, Wide C, U, V, etc.) with slight name tweaks. G&L still offers more options than just about anyone on a production guitar. However, a couple guitars — namely Fallout and SC-2 — do not offer neck profile options.

Here is a quick rundown of the more popular guitar and bass models and their new profiles:

  • ASAT – Modern Classic 9.5″
  • Legacy – Modern Classic 9.5″
  • Fallout – Slim C 12″
  • Invaders – Modern Classic 12″
  • S-500 – Modern Classic 9.5″
  • Comanche – Modern Classic 9.5″
  • SC-2 – Classic C 12″
  • ASAT Bass – 1.5 nut width Medium C 9.5″
  • L-1500 and 2000 – 1-5/8 Medium C 9.5″
  • M-2000 – 1-5/8 Medium C 9.5″
  • 5- String Bass – 1-3/4 Medium C 12″
  • JB – 1.5 Medium C 9.5″
  • LB – 1-5/8 Medium C 9.5″
  • SB – 1-5/8 Medium C 9.5″

Discontinued Models

G&L has thinned the herd slightly, and here is what I noticed. Nothing really earth shattering here; and from personal experience these models have either run their course, or never took off:

  • ASAT Special Deluxe
  • Legacy Deluxe (No pickguard, Flame Maple Top)
  • S-500 Deluxe (Ditto)
  • S-500 Semi-Hollow
  • Will Ray Signature
  • MJ Series bass guitars (Back in – recently amended)
  • JB-2 Bass
  • “Rustic” series products

Pickups

While there are no changes to their single coil pickups, G&L will be using Seymour Duncan pickups only in the Rampage, Bluesboy and ASAT Deluxe models. All other models – Fallout, Legacy, Invader — will use G&L’s own Alnico humbucker pickups. G&L is of course known for their pickups, and there also some cost savings involved with using their own product versus sourcing from someone else. These are the same Paul Gagon designed pickups as used in the Tribute series, and they are made in Fullerton by G&L. The Duncan pickups will be available as an extra cost option, and if you must have them, the up-charge is well below the cost of going out and buying a set.

How do the G&L Humbuckers sound? We’ve played the G&L Alnico humbucker pickups, and in most cases we are talking about the bridge pickup in the Legacy and Fallout. The resistance is in the 13K range versus 16K for the Duncan JB. The G&L pickup is a little warmer in tone, with a softer high end. It lacks some of the top end sharpness of the JB which depending on your point of view is a good thing. When gained up it’s smooth with creamy tone, and again less sharp and buzzy than the JB. We recommend giving it a try, and of course there are a zillion aftermarket options.

The potential backlash with the G&L pickups is that some will say that this just makes the USA and Tribute models more like each other. I can’t argue that point, and my feeling is that while import guitars are important to the industry, (after all imports are >90% of the total US guitar market) using the same pickups in both the USA and import lines sends a confusing message to the consumer.

Model Name Changes

  • Legacy HB is now the Legacy HSS
  • Legacy 2HB is now the Legacy HH

Pricing

Prices have gone up, but also they have shifted. The basic Legacy and ASAT guitars now have the same MAP price. Historically the ASAT was always more money. The SC-2 and Fallout are also the same MAP as the Legacy, and the S-500 is still a little more. The MAP on all these guitars is $1299 (S-500 $1399), and includes the standard burst or solid finishes, alder body, satin finish neck with maple or rosewood fingerboard, white pickguard and tolex case. It’s also of note that the Legacy HSS and HH models are now the same price as the standard Legacy, so no penalty for humbucking pickups. The Legacy Special is still a little more, and last time we looked those pickups were supplied by Kent Armstrong.

There are also minor price changes on some of the options, but nothing game-changing. And yes, stainless steel frets are still expensive. Our understanding is that they chew up the tools very quickly and of course take a lot more labor and Plek time.

The pricing relationship between List and MAP is also different, and the MAP is now about 30% off list. Without going into great detail, buyers who typically assume they can strike a deal below MAP will find dealers more reluctant to negotiate than in the past. As Fender has done, the MAP price really reflects the true street price, and the battle continues to preserve price and brand value in the cyberworld.

Wrap Up

While nobody likes to see a price increase, G&L still offers a unique value in a USA guitar that can be made to order. As far as these changes go, I think most of them make sense either commercially, or in terms of what the market really wants. And if you really want a “Pre-July” G&L you can still option a guitar to come out that way. So nobody is left out in the cold. That is unless you want an ASAT Special Deluxe.

Stainless Steel Fret Option for your G&L Guitar?

Among the many possible options for a G&L guitar opting for stainless steel frets. It’s also one of the most expensive options, with a MAP price of $300. That’s considerably more than some other manufacturer’s charge for stainless steel. I’m at a loss to explain the markedly higher price, other than the hardness of stainless steel likely requires more labor and time on the Plek® machine, and that the lower volume usage of stainless raises the purchasing cost. But should you consider stainless steel frets?

Longer Life

Stainless steel frets will certainly last longer than the typical “nickel silver” fret material used for guitar frets. Most stainless steels contain both nickel and chromium, which provide corrosion resistance and durability. The inherent hardness of stainless will resist fret wear better, and the chromium gives them a brighter finish. Medium jumbo frets will also wear slower than narrow vintage frets because there is more material in contact with the string, and subsequently less pressure per square inch on the fret. Of course playing style directly affects fret wear, and how much and where you spend your time on the neck will matter. But even with conventional frets unless you keep your guitar for twenty years or gig relentlessly, you may never encounter significant fret wear.

Playing Feel

More so than longevity, the big reason for stainless may be how they feel. The harder stainless finish creates less friction with the string, resulting in easier fretting and bending. Stainless fret guitars feel fast and require lower effort. Stainless frets with a nice hard ebony fingerboard practically play themselves. If you have a need for speed, go stainless.

Sound

Hypothetically one would expect the harder stainless fret material to sound brighter than standard nickel silver. In practice I don’t notice any significant audible difference, and in the grand scheme fret material does not play a great role in determining tone.

Should You Fret About Stainless?

If you faithfully play your guitar many hours a week and/or rely on it for your profession, then the durability advantages of stainless make sense. If you fit that description and prefer the narrower vintage frets, stainless is all but a must. But most of all, stainless frets have a great silky feel that enhances the playing experience, and makes the guitar feel quicker and easier to play. If you are OK with the additional cost, they are a worthwhile upgrade no matter how much you play.